RIO liquid phase rubber is a natural rubber with a content of more than 95%, providing excellent resistance to wet abrasion, tearing and cutting. The unique latex liquid phase process delivers exceptional physical properties and outstanding performance at significantly reduced cost to the customer, making RIO Liquid Phase Rubber a premium abrasion-resistant rubber for wet grinding conditions, especially for slurry conveying.
RIO Liquid Phase Rubber is a renewable resource and environmentally friendly, using natural latex to minimize the impact on the environment and resources, while maximizing safety, reliability and operational efficiency.
Proven top slurry wear resistance
Good combination of mechanical properties
high coefficient of friction
High resilience and low modulus
Excellent chemical resistance
Excellent cut and tear resistance
Environmental properties of natural latex
Testing Program | Testing Standards | Rui Ao Liquid Phase Rubber |
Tensile strength (MPa) | lSO 37: 2011 | >26 |
Elongation (%) | lSO 37: 2011 | >820 |
Tear strength (N/mm) | ASTM D624 00-2012 | >45 |
Hardness (SHa) | ISO 48-2010 | 35±3 |
Specific gravity (g/cm3) | lsO 2781-2008 | 0.95-0.98 |
Rebound rate(%) | BS 903-Part A8:1990 | >80 |
Wet grinding index | 1.0-1.2 | |
Operating temperature | -40'C~70'c |
Length 9250 mm × Width 1230 mm
1.5 mm ~ 35.0 mm
Slurry pipe lining
Slurry hoses
slurry pumps
Slurry valve lining
Hydrocyclone liners
Slurry tank liners
Screens
Filter press rubber membrane
Hot vulcanization bonding
Cold bonding
High temperature molding